Smart Roadster Engine Rebuild Kit - The Oh Dear Kit

Smart roadster full comprehensive engine rebuild kit.

This is "The Oh Dear kit". Almost the worst case situation is when the bits from the damaged valves have scored the cylinders, or one or more of the pistons is damaged. This might even mean a re-bore. The pistons are the single most expensive parts of the engine, so if they have to be replaced it is surely sensible to go "the whole hog” and recondition the engine by replacing the oil pump and its drive chain and the timing chain as well.

This kit contains:

  • 3 Pistons with rings sets
  • Main Bearings shells
  • Big end bearing shells (genuine item with locating lug)
  • Front and Rear crankshaft oil seal
  • A set of con-rod cap bolts
  • Head overhaul gasket and seal set (includes head gasket, inlet manifold seals set (of 3), exhaust manifold shield gasket, throttle body seal, valve stem seals (set of 6), thermostat seal to head, water pump outlet O-ring, cam half moon seal, etc)
  • Head Bolts Set (of 8)
  • 3 Exhaust valves
  • 3 Inlet Valves
  • Oil pump
  • Oil pump chain Kit
  • Timing chain kit (including tensioners)
  • Crankcase Breather pipe
  • Gearbox main shaft seal
  • 2 drive shaft oil seal
  • Small tube instant gasket for the sump/rocker cover

These kits are a mixture of genuine and equivalent quality parts.

0.25mm oversized pistons/rings are also available.

Oversized main bearings and conrod bearings are also available. Options are 0.25mm and 0.50mm oversized.

IF YOU CANNOT SEE YOUR REQUIRED COMBINATION OF OVERSIZED PARTS, PLEASE EMAIL OR CALL US SO WE CAN ORGANISE THIS FOR YOU.

We cannot ship the liquid/instant gasket outside the mainland UK, so international orders will not include this item.

The price of this kit indicates the likely cost of parts to recondition an engine, before any labour cost is added. If you have been offered a complete "reconditioned" engine for less, or for close to this figure, we'll leave you to draw your own conclusions!

Please note image is for illustration purposes only, please refer to description for actual content.

Will fit the smart roadster 698cc engine EXCEPT BRABUS

Not suitable for brabus - these have different exhaust valves.

Options

Price

Stock

Standard Pistons & Main / Conrod Bearing Shells £810.00 In stock
Oversized Pistons 0.25mm & Standard Main / Conrod Bearing Shells £810.00 In stock
Oversized Pistons 0.25mm & Oversized 0.25mm Main / Conrod Bearing Shells £810.00 In stock
Standard Pistons & Oversized 0.25mm Main & Conrod Bearing Shells £810.00 In stock
Standard Pistons & Oversized 0.50mm Main & Conrod Bearing Shells £810.00 In stock
Oversized Pistons 0.25mm & Oversized 0.50mm Main & Conrod Bearing Shells £810.00 In stock

Select Option


Recently Viewed

Smart Roadster Engine Rebuild Kit - The Oh Dear Kit